We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Used silicon disk.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Used silicon disk - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Used silicon disk Product List

1~3 item / All 3 items

Displayed results

Case study of an operation management company for incineration plants.

Introducing a case of Brodisk adopted by operators of waste incineration plants.

This is a case study of the introduction of "Broady Disk" following an inquiry from an operator managing a waste incineration plant. They contacted us because the rat hole phenomenon started occurring in the hydrated lime silo, and they sought measures to address it. After reviewing the silo drawings, we provided guidance on model selection, the number of units to install, and their positions, leading to the decision to implement our solution. This equipment does not experience clogging like a mesh filter, and the silicone rubber disk is made from a highly durable material. Its main feature is that it performs aeration along the inner wall of the silo. [Overview] - Silo diameter: Approximately 4500φ - Installation: 16 units installed in 3 layers (4 units in the lower layer, 4 units in the middle layer, and 8 units in the upper layer). * For more details, please refer to the PDF materials or feel free to contact us. * Our website features numerous implementation examples, which can be accessed through the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment
  • Used silicon disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0125 Measures against rat holes and bridging for cationic polymer flocculants

Prevent clogging of powder in the hopper of the powder dissolution device and promote discharge and flow!

We will introduce examples of measures taken against rat holes and bridges using cationic polymer flocculants. To prevent clogging of powders in the hopper of the powder dissolution device and to promote discharge and flow, we installed Brodie Disk Mini. A total of six units were installed, and due to their mini type, the air consumption is minimal. Additionally, both Brodie Disk and Brodie Disk Mini are low-cost. Even with six units installed, the costs remain limited. 【Hopper Overview】 ■ Upper Hopper: 500φ, 4 units installed ■ Lower Hopper: 250φ, 2 units installed *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous implementation examples, which can be checked via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment
  • Used silicon disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Measures against the adhesion growth of resin micropowder

A case where it was judged to be good due to the absence of attachment growth, and multiple Brody disks were introduced.

We received an inquiry regarding a φ1500 resin chip tank, where fine powder adheres to the cylindrical part above the material input level and the upper lid. When this powder grows and suddenly falls, it causes issues in subsequent processes, so they would like to try a blow disk. The user's request was to 'install a few as a test on a part of the upper lid,' but since the conditions are worse in the cylindrical part, we recommended installing a few there for testing. As a result, it was determined that there was no longer any growth of adhesion at the installation site, which was deemed satisfactory. The range will remain confidential as it pertains to the user's know-how. [Customer Inquiry Details] - In a φ1500 resin chip tank, fine powder adheres to the cylindrical part and upper lid above the material input level. - This powder grows and suddenly falls, causing issues in subsequent processes, so they would like to try a blow disk. *For more details, please refer to the PDF document or feel free to contact us.

  • Other processing machines
  • Used silicon disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Used silicon disk